Electrical connection

After verifying whether a device is complete, you can switch to the connection step.

For connection you will need:

  • An Ethernet UTP CAT5 or higher cable connected to a network switch/router. 

Cable lenght recomendations

The maximum length of the UTP CAT5 cable segment should not exceed 100 meters, according to the IEEE 802.3 standard.

  • Power supply at + 12V, 2 amps. 
  • Wires must be brought for connecting the lock and additional modules (optional). 

You can connect any type of electromechanical or electromagnetic lock for which the switched current does not exceed 5 Amps.

The following are typical connection schemes of all elements to the entrance panel: 

Connection using an external power supply and an electromagnetic lock


Connection using an external power supply and an electromechanical lock