Intercom

Address settings


Building:

Building number

0001-9999

Unit: 

Unit number

00-99

Floor: 

Floor number

00-99

Room:

Room number

01-99

Device number: The sequence number of the monitor in the system.

If the monitor is one, it is necessary to set "0" in this line. If there are several monitors, then the numbering should begin with "0" and end with "8".

Sync code: Synchronization code between monitors and panels for an intercom.

SIP


Enable/Disable: Enable/disable SIP registration.

Proxy: A proxy SIP server that can be represented by both an IP address and a domain name.

Data format:

Before the proxy address, you must specify "sip:".

Server: SIP server address.

Data format:

Сan be represented by both an IP address and a domain name.

STUN IP: STUN server address.

STUN port: The port of the STUN server.

Example:

For google STUN server 19302 port is used.

Password: Password of SIP number.

DTMF


Lock Name #1: The name displayed near the first lock button.

Default value: Enable/disable the function to send a standard value when the button to open the first lock is pressed (the internal protocol command to open the door).

Lock code #1: DTMF code transmitted when the first lock button is pressed.

By default, panels are set to open the door when there is "#" DTMF code received to open the first lock.

Second lock: Turn on/off the button of the second lock, for example when using the SH-42 module or the AV-07T panel.

Lock Name #2: The name displayed near the second lock button.

Lock code #2: DTMF code transmitted when the second lock button is pressed.

By default, panels are set to open the door when there is "0" DTMF code received to open the second lock.

Advanced intercom settings


Camera: Turn on/off the monitor camera.

Answerphone: The function of the automatic reception of a call by the monitor after 20 seconds of not responding to a call to record a video message.

The function is unavailable if the microSD card is not mounted.

Auto Answer: Automatically receive all incoming calls.

Auto hung up after lock opening: Automatically end a call 3 seconds after pressing the "Open" button during a call or before answering a call.

Deaf mode: Supply +12 volts to monitor alarm output after receiving an incoming call.

Protect the lock opening with the password: Request to enter the user password when pressing the button to open the lock during a call or view the panel.

Calls forward


Total count: The number of active redirects (up to four redirects).

URL: Direction for parallel call forwarding when an incoming call is made to the internal monitor.

Forwarding to the specified directions is activated when making calls to the monitor using an internal protocol.

SOS/Concierge button


The button is displayed on the main screen of the monitor and makes a call to the specified direction (via SIP or internal protocol) when you click on it. This may be another internal monitor in the system or the SIP number of any device.

Data format for calling through SIP:

Where 5544 - number of called subscriber, sip.bas-ip.com - SIP server address.

Data format for internal calls: