Syslog

The panel has the feature of sending logs to the Syslog server. In this tab, you can enter data for feature functioning.

SysLog Settings 


To configure sending data to the Syslog server, you need:

  1. Log in to the entrance panel web interface. By default, the username is admin and the password is 123456.
  2. Go to Logs > SysLog server.
  3. Enable the feature by ticking corresponding field.  
  4. Specify a tag that will distinguish this device data from other logs.
  5. Select the required Syslog level. Messages in the log have levels, and the selected level will allow reading messages from the initial level to chosen one. For example, if you select level 5, the server will be able to read messages from 1st to 5th levels. You can check levels of messages coming from the panel in Event types table (Severity column). 
  6. Enter Syslog server address in URL field. 
  7. Indicate port required for the server work.
  8. Submit settings.


Info

The log is cleared every 182 days.

By using the Download button, you can save the log to your device, and by clicking the Clear button, log entries will be deleted.

Message Format 



The syslog message follows RFC 5424 standard.

The content of the event messages is:

EVENT:{event_type}:{arg1}:{arg2}:{argN}:{text}

Field description:

FieldDescription
{event_type}Event type identifier
{arg1} ... {argN}Arguments characterizing the event (if any).
{text}Readable description of the event in free form. Free to use: inside this field.

SysLog example 

Info

For example, the Door opened by general access code event might look like this:

EVENT:100:0000:
Door opened by general access
code:0000

where, 100 is an identifier of Door opened by general access code event, 0000 is an event argument (in this case, the key that opened the door) and, further, a free-form description of the event: Door opened by general access code: 0000.

Event types 


Table with event types and their parameters:

IDDescriptionParametersFacilitySeverityPRI
000Any events not listed below
8670
100Door opened by general access codeCode number, door number8670
101Door opened by access code

Code number, apartment number, door number

8670
102Door opened by card

Card number, apartment number, door number

8670
103Door opened by UKEYCard number, apartment number, door number8670
104Door opened by Face identifier

Face ID, apartment number, door number

8670
105Door opened by exit button
8670
106Door opened by call host

Subscriber number, apartment number, door number

8670
107Door opened from the web interfaceDoor number8670
108Door opened by remote serverDoor number8670
109Door opened by free access button



110Door opened by QR code

QR number, apartment number, door number

8670
111

Access denied via multi factor access

One identifier8670
112

Access denied via multi factor access

Two identifiers

8670
113

Access denied via multi factor access

Three identifiers

8670
114

Access denied via multi factor access

Four identifiers

8670
115

Access denied via multi factor access

Five identifiers

8670
116

Access granted via multi factor access

One identifier

8670
117

Access granted via multi factor access

Two identifiers

8670
118

Access granted via multi factor access

Three identifiers

8670
119

Access granted via multi factor access

Four identifiers

8670
120

Access granted via multi factor access

Five identifiers

8670
121Access denied to identifiers without linkage to user

Identifier number, identifier type

8670
122

Access granted by valid license plate

Plate, car owner, lock number8670
123

Access denied by invalid identifier plate

Plate, car owner

8670
124

Access denied by unknown identifier plate

Plate8670
200The door is not closed for more than N secondsTime in seconds, how long the door has been open8670
201Door was closed
8670
202Door was opened with door sensorSensor type8670
203Door was closed with door sensor
8670
204Door was opened with enter button
8670
300Unknown card/UKEY was usedCard number8670
301Unknown access code was usedCode number8670
302Invalid card was usedCard number, apartment number8670
303Invalid access code was used

Code number, apartment number

8670
304Invalid UKEY was usedUKEY number, apartment number8670
305Invalid Face ID was usedFace ID number, apartment number8670
306Access denied by remote server
8670
307Invalid QR code was usedQR number, apartment number8670
308

Unknown QR code was used

QR number8670
309The lock is open on alarmLock number, unlock time in seconds8670
400SIP registration OK
8670
401SIP registration lost
8670
402Device booted
8670
403Email sent successfullyRecipient email, event ID2622
404Email not sentRecipient email, event ID2622
500Outgoing call

Subscriber number, apartment number

8670
501Incoming callSubscriber number8670
502Outgoing call failedSubscriber number, apartment number8670
600Login to the web interface
10686
601Failed login attempt to the web interface
10686

App Name 


In addition, the log entry contains information about the model, software version and MAC address of the device.

Field format: 

TAG:{model}_{version}_{mac}

Field description:

FieldDescriptionExample
TAGDevice tag (optional)Panel near the road
{model}Model nameAA-07B
{version}Firmware version 3.5.0
{mac}MAC address without separators706979EEEEEE