Electrical connection

After verifying whether a device is complete, you can switch to the connection step.

For connection you will need:

  • An Ethernet UTP CAT5 or higher cable connected to a network switch/router. 

Cable lenght recomendations

The maximum length of the UTP CAT5 cable segment should not exceed 100 meters, according to the IEEE 802.3 standard.

  • Power supply at + 12V, 2 amps. 
  • Wires must be brought for connecting the lock and additional modules (optional). 

You can connect any type of electromechanical or electromagnetic lock for which the switched current does not exceed 5 Amps.

The following are typical connection schemes of all elements to the entrance panel:

Connection using an uninterruptible power supply unit and an electromagnetic lock 


Connection using an uninterruptible power supply unit and an electromechanical lock 


Connection using an external power supply and an electromagnetic lock 


Connection using an external power supply and an electromechanical lock 


Connection using a PoE power supply and an electromagnetic lock 


Connection using a PoE power supply and an electromagnetic lock